Phoenix 2000 EPO Composite R/C Glider (Plug & Fly)
his 2 meter wingspan glider takes 15 minutes to assemble and lasts a lifetime!
The wings and tail are made from tough EPO foam. However, the fuselage is made from a really strong blow moulded nylon skin with plywood formers, making it almost indestrucatable. Usually reserved for baby toys*.
The virtually indestrucatable fuselage is smooth and ridgid yet still light enough for the glider to perform.
Both the main wing and tail are screwed into place and the two wing halves have a carbon fiber rod for added strength.
The main wing includes 1 servo per aileron for strong control surface movement plus there is a pre-moulded slot so you can add your own flaps later.
All 4 9g servos, speed controller and brushless outrunner are included. Just add your own receiver and battery to be flight ready!
This really is a super strong glider that takes 15 minutes to put together and virtually indestructible.
Spec.
Wingspan: 2 meters (78.74inch)
Length: 1160mm
Flying Weight: 980g
Battery required: 1500mAh 3S
Motor: Brushless 2815/1050Kv
ESC Included: 30A
Required.
LiPoly 1300~1800mAh 3S
Receiver
Tx/Rx
*Having a blow moulded fuselage on a glider is an excellent solution however it is not popular amongst manufacturers due to its high cost, effectively doubling moulding costs.
|
